Author: Michael October 10, 2005 at 16:38:40 from 209.33.105.204
I have only been around slightly modified and all out race engines. I am planning to buy a roller to race b-mod. I am wondering if my combination would be competitive and need to advice from those who are knowledgable. 415 ci sbc eagle steel 3.85 crank, 6" h beam rods with JE flat top pistons, balanced. I want to use Bowtie vortec heads but am unsure weather the 206cc intake version would match well with a smaller non roller cam and a 2 barrel or if the 180cc would be more suitable. What size and solid or hydro cam is typically used in a B- mod engine, and would you use a single or dual plane intake? Like i say i have mostly been around all out racing small blocks.
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.