Author: machine shop tom December 27, 2005 at 18:26:39 from 66.255.216.138 in reply to: Where can I find these rod bearings? posted by Tom G. on September 17, 2005 at 15:15:46
I'd look for another crank. It sounds like the journals may have been ground for a Quad 4 bearing spec.(1.8885") or a Honda size journal spec. (1.8888").
But your spec would make them .0367" under those specs. Seems kind fishy to me.
tom
Post Followup
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.