Author: JEFFERY50240 December 7, 2007 at 22:48:47 from 188.8.131.52
Author: Jeffery50240 December 4, 2007 at 13:41:30 from 184.108.40.206
I have one next to new 4 gallon custom dry sump tank from a top nextel team ,no expense spared on this and comes with three heaters- two in tank and one wrap around. This tank comes with everything including safety wire sealed Cad caps and mirror polished, could be used for show car, it's that nice. Cost new was around 1500.00, make me an offer you might be surprised and get it.
I also have a brand new MSD pro-billet distributor never been raced includes all the extra bushings, weights and springs from the factory. This is a none adjustable collar (Which is only needed for custom height blocks anyway) and is a brand new never used piece from GM Racing division with GM part number, everything else under the part number is MSD much like the Bowtie Intake which are made by Edelbrock just has the gm name on it. MAKE ME AN OFFER!!!!
I ALSO HAVE SEVERAL SETS OF JE 18/23 DEGREE PISTONS FOR 4-INCH TYPE BORE IN OVER SIZE. I'm not sure of the exact oversize but will let anyone know who is interested of the exact size of each set. I can tell you that both sets are dished for small CC cylinder heads and all have all the custom work done to them including gas ports, light-weight, anti detonation rings high dollar wrist pins, forced pin oiling and extra deep valve pockets for 800 plus lift cams, more I'm sure but don't have them in front of me at this time . Make an offer!!!!
I have a ton of stuff so if you need something let me know I might have it.