Author: Terry March 26, 2015 at 14:01:35 from 22.214.171.124
513 CI Cadillac engine. app 575 to 600 HP
500 +060 10-1 compression. Probe forged flat top pistons, H-beam rods. Factory forged type crank shaft, it has been profiled and knife edged and turned down, plus reground and stroke indexed and completely balanced. The crank shaft rear has been drilled for use with a 4 speed input shaft . Billet 12" flywheel comes with it. High volume oil pump. Heads are Cadillac 902 castings closed chamber heads. the heads have been ported and cut for large valves. 2.190 intake and 1.840 exhaust. Custom ground Comp cam, lobe separation is 108 .. Dur. @.050 237/240 lift 547/576 .. Makes tons of torque Heads are topped off by a custom set of TD fully adjustable shaft rockers.. Large push rods 3/8x .083x 10.1 complete the valve train .. The intake side finds an Edelbrock intake that has been modified for fuel injection rails, topped with a 1200cfm throttle body. Fuel and timing are controlled by a Fast XFI Electronic injection system This comes complete with all the electronics and wiring, computor and set up disc for it (you must provide your own lap top).. The distributor is custom built unit from MSD to work with the fuel injection and computer... We had this in a 4 wheel drive custom blazer and it would light up all four tires with ease.. Extremely low hours and miles on this engine $10,000 pictures upon request.