Author: xTu3RJ3FG0sx December 1, 2015 at 06:37:42 from 188.8.131.52 in reply to: XnXeAXaDzsxuxojeKObfkZMUwvgaRCPBgwdhCi posted by ZEJxU on April 6, 2014 at 20:19:39
Seems that overfilling' may still be the issue the inreitor may no longer be overfilled when running with a sparse build, but the surfaces probably still are. Have you tried setting the feed rate a couple percent lower? I think you press the %FLOW button, enter in a new feed (normal feed is 100%, so I'd try 95) and hit the enter button.
Note: Follow-ups should only be used for information of interest to all viewers. For other inquiries or personal communication please send an email if possible or use other contact information provided.
When you return to the board you will need to do a REFRESH or RELOAD to see your followup.